Stainless Steel Hob Splashback 750H x 600mm / 900mm Width Kitchens 56486000
Ideal splashback panel for behind hobs. Available in two size widths, 600mm or 900mm, 0.9mm thickness stainless steel wrapped onto a 9.00mm thick MRMDF. The splashback has a vertical brushed steel finish, perfect for kitchens due to the easy keep clean material.
If you're looking for a simple way to give your kitchen a sleek, modern finish while protecting your walls, a stainless steel splashback is a great choice.
All are sent @ 750mm high.
Stainless steel hob splashback, installation & modification advice
- Leave the protective film in place during installation.
- Apply masking tape to the area to be cut.
- Mark out the cutting line clearly.
- Drill a pilot hole large enough to fit the jigsaw blade, then cut along the marked line.
- A small drop of oil may be applied to the blade if required to ease cutting.
Storage
We recommend that the protective plastic film on the stainless steel remains in place until installation is fully completed to prevent damage.
Cleaning & Care
Chlorides (such as bleach or common salt) and acids of any kind can damage all grades of stainless steel. In the event of a spill, rinse immediately and thoroughly with plenty of clean water, then dry with a soft cloth.
Metal objects that may rust should never be left in contact with stainless steel surfaces.
Safety Advice
Care should be taken when handling and installing these products. For your safety, we recommend wearing protective gloves to guard against unfinished edges and corners
Features
- Vertical brushed steel finish
- Three widths available
- Can be fitted with adhesive (not included) See above
Dimensions
- 600mm & 900mm Widths
- 750H height
- 0.9mm Thick stainless
See our Vuplex cleaning solution to keep you splashback looking great.
