Libra Concealed Cabinet Hanger H2 Wall Unit Fixing 75Kg + Adjustment 29041910
Libra concealed cabinet hanger H2 X1 Purchase in singles, X2 or X10
The Libra concealed wall hanging brackets are perfect for installing wall units. Weather in the kitchen, utility or office.
Featuring an innovative anti-turnover device. Secure the unit hangers behind the rear panel. Cover caps are available which would be visible inside the cabinet.
The hangers includes both vertical & horizontal adjustment. Vertical 13mm adjustment & horizontal 12mm.
The two movements are 100% independent of each other & therefore make the adjustment much easier & more efficient.
A large 75Kg carrying capacity per Libra concealed cabinet hanger. (Purchase X2 and gain 150Kg). Slots into side carcass by making four face borings and secured in position by rotating the locking pin with ridges 180°
Mounting methods :
Dowel / Screw Mounting - Slots into the side cabinet by making face borings & secured in position by rotating the locking pin with ridges 180° A 3.5 x 20mm lateral wood screw (Not included) permanently secures the cabinet hanger.
Choose the quantity via the drop down menu X1 - X2 or X10
Other Libra products available
Features
- Wall unit hanger
- Dowels/Screw mounting
- Steel
- Zinc plated
Includes
- X1 Cabinet hanger
- Also sold X2 or X10
Dimensions
- Vertical adjustment: 13 mm
- Horizontal adjustment: 12mm
- Width 62mm
- Length 142.2 + 32mm
- Single 75 Kg capacity
- 150 kg per pair (Load carrying capacity applies to x2 cabinet hangers purchased, bearing an evenly distributed load in accordance with regulation DIN 68840)
Cabinet fixings should only be adjusted with a hand tool and not a power tool - For safety reasons, the cabinet fixings must be fitted in the upper third of the carcass.
Recommended : A 3.5 x 20 mm lateral wood screw permanently secures the hanger in place (not provided) Installation instructions available. The locking adjustment screw cannot be accessed if round cover caps are fitted.
