800mm Tambour Door Kit White Gloss Shutter Vertical Door 1450mm High
800mm X 1450mm High Glossy White Finish. Can be trimmed down in height if required. Cabinet Not Included
800mm Kitchen & Office Tambour Door Kit 1450mm High Stainless Steel
The Easy Fit Tambour Door Kit is delivered with a pre-assembled and pre-tensioned cartridge for simple installation into the top of the cabinet. The modular system includes slats with a handle section profile, easy roll mechanism and front fixing profiles.
Designed for use with 18mm thick carcass/unit material. Would look great in any home, office or commercial premises, to house a kettle, toaster or maybe keep an office tidy.
The tambour kit is designed to suit a maximum height of 1450mm but fewer height units are also suitable. Either keep coiled within the carcass or by cutting the slats down in height to suit. Smooth operation rollers will keep the system from working day after day along with a hold function, aiding opening & closing at any desired point. Includes a modern integrated bull nose handle profile.
Tested technology - LGA tested & certified to 50,000 cycles - The new & improved enhanced UK tambour door has been upgraded and the foil that is applied to the surface of the PVC extrusions is high quality. The material is a mixture of PVC and ABS plastic offering a lightweight solution whilst also allowing the tracks and profiles to be trimmed to length easily (if fitting to a shorter height). The white gloss foil is applied over the plastic during the extrusion process.
Brand New White Gloss. This is a very high-quality durable product.
- UK Tambour Door Kit is supplied pre-assembled and pre-tensioned, installed in 5 simple steps
- Functional yet elegant, the ultimate space-efficient storage solution. Designed to fit a maximum height of 1450mm but suitable for use at any height in between.
- High quality glossy white finish with a rich foil used.
- 25mm individual slat depth, designed for use with standard 18mm carcass
- Internal cabinet space required: 270mm depth, 188mm height. Any internal cabinet shelves must be set back at least 15mm from cabinet edge
- Supplied as a kit including fitting instructions, allowing you to install the unit into your cabinet immediately
Please note the tambour door kits are not suitable for use near water or heat sources.
- White gloss finish
- Pre-tensioned & pre-sprung
- Height adjustable
- Smooth operation
- Tested & certified
- Bull nose integrated handle
- Roller mounting bracket
- Idler roller
- Countersunk screws
- Pan head screws
- Unit not included
- Designed for 800mm width units (External)
- Maximum 1450mm high
- Suits own units 18mm thick material
- Minimum height required 188mm
- Internal cabinet depth required 270mm
- 25mm Height slats
- Also available in a 400mm, 500mm 600mm 900mm & 1000mm
- In stock ready for immediate dispatch: Call us on 01205 760462